Deleting Measurement Results; Saving Measurement Results - HellermannTyton Autotool 2000 CPK Operating Instructions Manual

f Click on the measurement mode functions to trigger the
corresponding action on the AT2000 CPK.
f Perform one binding.
; The binding information is displayed
f Enter the calculated value into the field
.
3
f Click on Accept.
; A new line is added to the logfile.
f Repeat the measurement procedure several times.
f Click on Deactivate measurement mode
off the tool.

9 .7 .2 Deleting measurement results

f To delete a line, highlight it and click on

9 .7 .3 Saving measurement results

f To save the measurement results in the table, click on
Export.
f Define the storage location for the exported *.CSV data.
The measurement results can also be converted into the file
formats *.xls or *.html and displayed, à "Export data" on
page 22.
Operating Instructions • AT2000 CPK • 07-2019 • v03 • 106-29004
.
1
Measured force
or switch
6
Delete line.
HT Data Management
26