Device Control - Align - ETC Cobalt Series User Manual

Device Control - Align

The Align key in the
1. Select all involved devices, including the one you want to copy parameters from
2. Use
Next/Last
3. Hold ALIGN and then press the key corresponding to the parameter or parameter group you
want to copy:
Function
Align FOCUS
Align COLOR
Align BEAM
Align single parameters
*If Palettes are used, the palettes will be aligned, not the values.
programming section copies parameters from one Device to several others.
to select the device you are copying from
Key
[ALIGN] & [FOCUS]
[ALIGN] & [COLOR] All Color parameters are
[ALIGN] & [BEAM]
[ALIGN] &
[Wheel_Key]
588
Feedback
All Focus parameters are
copied*
copied*
All Beam parameters are
copied*
The parameter assigned to
the wheel is copied.
Cobalt 8.1 - 20181029