Visualization - Capture - ETC Cobalt Series User Manual

Cobalt 8.1 - 20181029
You may need to run an application called NICPicker, which may or may not be packed with
Wysiwyg. This application sets which of your network adaptors is used for Net2 traffic. It is available
as part of the free download of Network Configuration Editor (NCE) from ETC.
Note: There are ETCNet2 devices in the Device Manager in Wysiwyg, but these do not function.
Allow EDMX reception as shown above to see EDMX levels.
WYWISYG Link: You can send the patch in WYSIWYT to Cobalt. Make sure you have imported the
templates involved first. Clear patch clears the dimmer patch as well as the device patch.

Visualization - Capture

Capture can receive many protocols including Net2 (EDMX) and Net3 (sACN/E1.31) levels via
ethernet.
Capture Polar and Capture Argo receive "ratified" sACN/E1.31.
In the Tools menu of Capture, select Options. Navigate to the Connectivity tab, and select your
network interface card if required. Note that depending upon your PC's configuration, a setting of
Automatic may not work; in this case select the appropriate adapter.
993