Example: Clear And Reset Patch - ETC Cobalt Series User Manual

Example: Clear and Reset Patch

Clear and Reset Patch is done from the Patch Wizard.
1. Select the Output tab by pressing OUTPUT
2. Open the Patch Wizard by pressing WIZARD
3. Select the Set/Clear tab with arrow keys or touch.
4. Choose action in the Operation dropdown
5. Check "Apply to all" if you want to affect the whole patch
6. Confirm with EXECUTE
7. Confirm the dialogue with OK
8. Press ESC to exit the dialogue
You can read more in
Quit Example
Patch Introduction.
1062
Cobalt 8.1 - 20181029