Template Editor - Columns & Functions - ETC Cobalt Series User Manual

Template Editor - Columns & Functions
Press INSERT to insert a new Parameter. These are the functions in the columns.
Function
Parameter
DMX
Type
Default
Highlight
Snap
Invert
Ranges
Tables
Low DMX
Fine Step
Fade with int
Key Feedback
Opens a dropdown. Select parameter.
[MODIFY]
Set DMX offset (1-256).
[#] [MODIFY]
Set HTP (intensity) or LTP 8/16bits.
[MODIFY]
The default value that is used when
[MODIFY]
patched, and by HOME ATTRIB.
The value used in Highlight mode.
[MODIFY]
Set Snap or Fade.
[MODIFY]
Invert the values of a parameter.
[MODIFY]
Opens the Range Editor for subranges
[MODIFY]
such as gobo positions.
Opens the Table Editor for table
[MODIFY]
functions.
Set the low resolution DMX offset for
[#] [MODIFY]
16 bit parameters
See 16 Bit Control - Fine Step
[MODIFY]
The parameter will follow the intensity
[MODIFY]
of this Device.
294
Cobalt 8.1 - 20181029