Shortcuts - Masters & Channels - ETC Cobalt Series User Manual

Master control functions
DESCRIPTION
Activate the Master View*
Open the Master Editor.
Set an individual flash level (in flash mode)
Toggle a master on/off
Toggle master # on/off
Fade a master to a specific level
Hold FLASH MODE and press master keys to
toggle modes. Use PAGE +/- to select
functions.
Connect a master playback to the Master
playback
Tap tempo for sequence on a master (hold tap
and tap Master key).
*You can also click on the Master View node in the Browser.
Shortcuts - Masters & Channels
Functions for selecting channels to and from Master Playbacks.
DESCRIPTION
Select the channels of a Preset/Group in a
Master Playback.
Add channels of a Preset/Group in a Master
Playback to the channel selection
Subtract channels of a Preset/Group in a Master
Playback from the channel selection
Select channels of a Preset/Group in a Master
Playback which are active on stage
Load the selected channels and levels one by
one to Master Playbacks.
Load the selected channels and levels as a
group to a Master Playback.
SYNTAX
[MASTER]
[MODIFY] & [Master_Key]
[#] [FLASH_MODE] &
[Master_Key]
[START] & [Master_Key]
[#] [START]
[#] [START] & [Master_Key]
[FLASH_MODE] &
[Master_Key]
[CONNECT] & [Master_Key]
[TAP] & [Master_Key]
SYNTAX
[Master_Key]
[+] & [Master_Key]
[-] & [Master_Key]
[ALL] & [Master_Key]
[CHANNEL] & [Master_Key]
[GROUP] & [Master_Key]
939
Cobalt 8.1 - 20181029