Record Directly To A Master; Record Selected Channels To Any Preset - ETC Cobalt Series User Manual

Record Directly To A Master

You can record the selected channels, or all channels with an intensity on stage directly to a Master. A
preset will be created automatically if none is specified. If Attribute recording is set to Automatic,
attributes will also be recorded. The time is default set to 100%. See
Action
Record selected
Record selected as...
*If no channels are selected - all channels in A are recorded.
**To separate the number series of Presets in Masters and in the Main Playback the suggested Preset
number (if no number is entered) will be starting at Preset 801. After this the last used number when
recording to this Master will be incremented.
NOTE
For a Master with a Sequence or Chase, a new preset is recorded to that
Sequence or Chase.
For a Preset - all attributes are recorded, except those Masked by the Global
Mask. For a Sequence step attributes are recorded in the same way as the
sequence of the Main Playback.

Record Selected Channels To Any Preset

Record the selected channels, with attributes and dynamics, to a specified Preset. All moving device
attributes for the selected channels will be recorded (not only changed attributes).
Setting
Record selected
Record selected to...
Key Feedback
You will get a popup with
[RECORD]
the next free preset
& Master Key
suggested**.
You get the message
[#] [RECORD]
"Preset Recorded" in the
& Master Key
status bar.
Key Feedback
You will get a popup where
[CHANNEL] &
you confirm recording this
[RECORD]
Preset, and can write a text
label.
You will get a popup where
[#] [CHANNEL] &
you confirm recording this
[RECORD]
Preset, and can write a text
label.
341
Cobalt 8.1 - 20181029
Presets - Times.