Masters - Channels; Load Channels To Masters - ETC Cobalt Series User Manual

Masters - Channels

Hold CHANNEL and press a Master Key to load and play back single channels (Ch#) so several
masters starting from the first pressed, or GROUP and Master key to load a group of channels
(Chs) to any master playback. They are stored in the current Master Page.
Once a channel is loaded to a master you can
•
Use the master fader to set the level
•
Use the flash key to flash the channel
•
Use the master key to select the channel

Load channels to masters

These functions are used to load channels (with levels) to masters.
Function
Channels
Single channels
Ch # at 100%
Keys Feedback
The selected channel(s) are
[GROUP] &
loaded with current level to
[Master_Key]
the Master, which is set to
full to avoid a Black Out of
these channels on stage.The
channel levels are also
cleared from A.
The selected channel(s) are
[CHANNEL] &
loaded at 100% to the
[Master_Key]
Master Playbacks, starting
at the one pressed. The
master level will be set to
the level from stage and
this level will be cleared
from the A field.
Channel # is loaded at
[#] [CHANNEL] &
100% to the Master.
[Master_Key]
804
Cobalt 8.1 - 20181029