Cobalt Direct Selects - Add/Replace; Cobalt Direct Selects - Console Keys In Combination; Cobalt Direct Selects - Direct Mode - ETC Cobalt Series User Manual

Cobalt Direct Selects - Add/Replace

For Groups there are two modes
•
Add - every new group that is selected is added to or subtracted to the previous selection
•
Replace - every new group that is selected will replace all previous selections
Holding CH or ALL in combination with a DS-group or palette to select included or active channels
will follow ADD/REPLACE.

Cobalt Direct Selects - Console Keys in Combination

A number of physical console buttons can be pressed in combination with DS tab buttons.
UPDATE - to update Palettes
RECORD - to record Palettes and Groups
CH - Hold CH and press a Palette or Group to select all channels involved
ALL - Hold ALL and press a Palette or Group to select all channels involved with a level above 0%
TEXT - Hold TEXT and press a DS item to overwrite the text
DELETE - Hold DELETE and press a DS item to delete
CH/ALL will follow Add/Replace mode

Cobalt Direct Selects - Direct Mode

One of the very fast and unique functions of Cobalt. A large number of keys can be held to enter
temporary Direct Mode for the Direct Selects. As long as the key is held it is possible to access the
first forty items belonging to this key category.
Function
1. Activate Direct Mode
2. Select Direct Select
screen key (1-40) OR
Direct Select key 1-10 in
Congo Jr/Kid.
Key Feedback
Hold a function key Direct Select display shows
(see below) all recorded
Direct Select key When the key is pressed
that item is activated.
97
Cobalt 8.1 - 20181029