Masters - Groups
Enter the number, hold GROUP and press a Master Key to load to that Master.
You can load and play back groups from master playbacks. They are displayed with a "Gr" before
the number in the master displays.
Once a group is loaded to a master you can
•
Use the master fader to set the level
•
Use the flash key to flash the group (if it has levels)
•
Use the master key to select the channels in the group
NOTE
If a change is made to a Preset or Group that is loaded to a Master which is
active - the change will be pending until the Master is brought to zero and
back up. Pending content indicated with inverted colors on the master LCD.
Load a group to a master
These functions are used to load groups to masters.
Function
Load a group
Load several groups
Master settings for groups
These are the settings you can change for masters with group content.
Hold SETUP and press the Master key to open the settings.
Keys
Feedback
Group # is loaded. The
[#] [GROUP] &
number and name are
[Master_Key]
shown in the master display
Hold Group and keep
[#] [GROUP] &
pressing Master keys to
[Master_Keys]
load the next stored
Groups
814
Cobalt 8.1 - 20181029