Setting A Master As The General Record Target - ETC Cobalt Series User Manual

Cobalt 8.1 - 20181029

Setting a Master as the General Record Target

The default record target for the Record function is the Main Playback. All recording actions are
assumed to relate to this playback.
You can set any other master playback (1-80) to be the record target. This is helpful when you work
with multiple sequences on masters.
Setting a master as the general record target can be done in two ways:
In the Record Settings - Hold SETUP and press RECORD. 0 is the Main Playback, 1-80 are the
masters.
C & RECORD will reset the general recording target to the Main Playback.
When you record to a Master using RECORD & MASTER KEY (see the checkbox "use this master
as general recording target")
342