Example: Patch By Channel - ETC Cobalt Series User Manual

Example: Patch by Channel

This is an example of the workflow for patching by channel. This requires you to be in RPN (default)
channel command syntax.
1. Select the Output tab by pressing OUTPUT
2. Select channel 5
5 CHANNEL
3. Patch this output to output 1
1 MODIFY
4. You will get a dialog asking if you patch output 1 to channel 5. You will have the option of
checking a box to replace the currently patched output(s).
5. Confirm with OK
You can continue to do this for any other channel, and read more about it in
clear the Patch press WIZARD to open the Patch Wizard.
Quit Example
1060
Cobalt 8.1 - 20181029
Patch Introduction. To