Preset Attribute Editor - Columns - ETC Cobalt Series User Manual

Preset Attribute Editor - Columns

These are the different Device parameters that are displayed for each with their current values. For
editing see Device Views -
Function group
Channel & Level
Device
GoOnGo
FOCUS
parameters
COLOR
parameters
BEAM parameters Focus, Iris, Zoom,
CONTROL
parameters
*There is a popup to confirm deleting a device.
Editing.
Parameters Explanation
No input The number of the device is
highlighted when selected, and red
when focused with NEXT/LAST.
The level is indicated to the right.
Delete Device Press DELETE to delete this device
completely*
AutoMark, GoOnGo or Overrides the Sequence Step
GoInB per Device GoOnGo setting for this particular
Device.
Pan, Tilt, Focus Speed The parameters that exist for the
selected device are shown with their
values.
The parameters that exist for the
Cyan, Magenta,
selected device are shown with their
Yellow, Color,
values.
Color2, CTO, Color
speed etc...
The parameters that exist for the
selected device are shown with their
Strobe, Gobo, Gobo
values.
<>, Gobo rot, etc...
The parameters that exist for the
Aux 1, Control,
selected device are shown with their
Dummy ch's etc...
values.
607
Cobalt 8.1 - 20181029