Select Channels From Effect - ETC Cobalt Series User Manual

At mode syntax
If your Cobalt is set to use At Mode for channel commands, effects are selected in the following ways.
You can terminate a selection in At Mode pressing @Level or the decimal point.
Action
Select effect
Add an effect
Subtract an effect
Add multiple effects
Add a channel
Add a group
Subtract a channel
Subtract a group

Select channels from effect

These functions make it possible to select channels involved in an effect.
Action
Select active channels
Select all in effect...
Select active effects
Toggle between
selecting an effect and
the channels assigned
to it.
Key
[EFFECT] [#]
[+] [EFFECT] [#]
[-] [EFFECT] [#]
[THRU] [#]
[+] [CHANNEL] [#] Channel # is added to the
[+] [GROUP] [#]
[-] [CHANNEL] [#] Channel # is subtracted
[-] [GROUP] [#]
Key
[EFFECT] &
[CHANNEL]
[#] [EFFECT] &
[CHANNEL]
[EFFECT] & [ALL]
or
[ALL] & [EFFECT]
[Inv_Eff/Ch]
or
[C/Alt] & [INV
GROUP]
681
Feedback
Effect # is selected
Effect # is added to the
current selection
Effect # is subtracted from
the current selection
Up to effect # is added to
the current selection
current selection
Effect # is added to the
current selection
from the current selection
Effect # is subtracted from
the current selection
Feedback
All channels involved in effects
that are active are selected.
All channels involved in effect
playback # are selected.
All active effect playbacks are
selected. Pressing ALL alone
will never select effect
playbacks.
The soft key Inv Eff/Ch in the
Effects soft key meny allow
you to toggle the channel
selection between the selected
effect playback and the
channels assigned to it.
Cobalt 8.1 - 20181029