Chase Step Editor - ETC Cobalt Series User Manual

Cobalt 8.1 - 20181029
*The Default times are applied until you define a different time in the Chase Steps Editor.
**Loop Time = the amount of time it takes to pass through all the steps of the chase once. Edit the
loop time and all step times will be adjusted to evenly fit within this time value..
***RateMin and RateMax work together to set the playback rate of the chase. When these values are
the same, the chase is adjusted evenly. When these rates differ, the chase will play back randomly
using rate values between the Min and Max value. This is a good way to create more organic chases
for things like lightning and water reflections.

Chase Step Editor

The Chase Step Editor allows you to edit channels, levels and times for each step separately.
•
Press MODIFY in the STEPS cell of the Chase Editor.
700