Masters - Attribute Parameters; Load A Parameter To A Master - ETC Cobalt Series User Manual

Masters - Attribute parameters

Hold a Wheel Parameter key and press a Master Key to load to that Master.
You can load and activate attribute parameters from master playbacks. This is very useful for
parameters that map well to faders, like iris, focus, shutters and color mixing.
Once an attribute parameter is loaded to a master, and depending on the nature of the parameter, you
can
•
Use the master fader as the "parameter wheel"
•
Use the master key as the "parameter wheel key"
•
Hold the Master key and use the level wheel to change the value relatively
The result is applied to the selected channel(s).

Load a parameter to a master

To load a parameter to master select a device with that parameter, hold the parameter wheel key and
press a master key.
To be able to do this you must have a device selected that has the parameter you wish to load, and the
parameter page (Focus, Color, Beam) has to be selected so the parameter is active on one of the
wheels.
To remove a parameter from a master, hold C and press the master or potentiometer key.
834
Cobalt 8.1 - 20181029