Presets - Record; The Recording Popup - ETC Cobalt Series User Manual

Presets - Record

The RECORD key in the
to a Preset or a Cue in the Main Playback. or in a master. What you see in the active Channel View is
what is recorded. Normally only changed moving device parameters are recorded. You can set any
master or playback as the record target for the RECORD key, see
Function
Record new
Record new #
NOTE
You can define how moving device parameters are stored in the Record
Settings. You can set the record target. Hold SETUP and press RECORD.
A recorded Preset is always added to the Preset List (Browser >Presets).
If there are moving devices defined and you are using "Changed" recording
mode, the first preset in an empty sequence will ask you if you want to make
a block cue.

The Recording Popup

The recording popup has Basic, Advanced, and Times tabs. The last used tab is saved as the default
choice for the next record action. The Times tab will default back to the Advanced tab for the next
record action.
In the Basic tab you can confirm recording a Preset (RECORD or MODIFY). You can also add a
Preset or Sequence text and define the fade type.
programming section allows you to record the output on stage, or part of it,
Key
[RECORD]
[#] [RECORD]
335
Record Target.
Feedback
Record the content of the
selected Channel View to a
new Preset or Cue in the
Main Playback with the
next free number. You will
get a popup. See The
Recording Popup
Records preset #. You will
get a popup. See The
Recording Popup
Cobalt 8.1 - 20181029