Mask; Global Mask - Functions - ETC Cobalt Series User Manual

Mask

You can mask whole groups of parameters (FCB) or single parameters in a group with the MASK
key.
•
When mask is active it is indicated in the LED of the MASK key, and at the top of the
screens.
•
The mask is used when recording Presets, Palettes and Dynamics.
•
Masked parameters are displayed in Live tab Attributes view and in the ML LCD on the
facepanel with "--".
•
When you record a Preset or Palette, masked parameters are NOT recorded.
•
You can prepare and store 999 Mask templates and activate as the global mask anytime.
•
User Masks can be accessed as content in the Direct Selects.

Global Mask - Functions

Function
Enable/Disable Mask
Mask FOCUS
Mask COLOR
Mask BEAM
Mask parameter
Open Mask editor
Key Feedback
The LED in MASK is lit.
[MASK]
In the Main Display you
can see "Mask: and "-" for
nothing, "fcb" for partial
and "FCB" for full
masking. On the top of
every screen you can see:
Toggles the Mask for the
[MASK] & [FOCUS]
all FOCUS parameters
Toggles the Mask for the
[MASK] & [COLOR]
all COLOR parameters
Toggles the Mask for the
[MASK] & [BEAM]
all BEAM parameters
Toggles the Mask for any
[MASK] &
single parameter
[Wheel_Key]
[MODIFY] & [MASK] Opens the Mask editor (see
below).
663
Cobalt 8.1 - 20181029