Upgrade The Firmware - CyberData 011478 Operation Manual

Sip outdoor video intercom with rfid
Hide thumbs Also See for 011478:
Table of Contents

Advertisement

2.5 Upgrade the Firmware

Note
To upgrade the firmware of your device:
1. Download the latest firmware file from the Downloads tab at the following webpage:
2. Unzip the firmware version file. This file may contain the following:
3. Log in to the Home page as instructed in
4. Click on the Firmware menu button to open the Firmware page
CyberData RFID Video Intercom
5. Click on the Browse button, and then navigate to the location of the firmware file.
Operations Guide
CyberData strongly recommends that you do not upgrade the firmware when the device is
likely to be in use.
https://www.cyberdata.net/products/011478
Firmware file
Release notes
Autoprovisioning template
Page".
Caution
Equipment Hazard: CyberData strongly recommends that you first reboot the
device before attempting to upgrade the firmware of the device. See
"Upgrade the
GENERAL ALERT
Figure 2-69. Firmware Page
Installing the SIP Outdoor Video Intercom with RFID
Section 2.4.4, "Log in to the Configuration Home
Firmware".
931667A
Intercom Setup
(Figure
2-69).
Section 2.5,
CyberData Corporation
115

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 011478 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents