Upgrade The Firmware - CyberData 011307 Operation Manual

2.5 Upgrade the Firmware

Note
To upgrade the firmware of your device:
1. Download the latest firmware file from the Downloads tab at the following webpage:
2. Unzip the firmware version file. This file may contain the following:
•
•
•
3. Log in to the Home page as instructed in
4. Click on the Firmware menu button to open the Firmware page
Singlewire Keypad Intercom
5. Click on the Browse button, and then navigate to the location of the firmware file.
Operations Guide
CyberData strongly recommends that you do not upgrade the firmware when the device is
likely to be in use.
https://www.cyberdata.net/products/011307
Firmware file
Release notes
Autoprovisioning template
Page".
Caution
Equipment Hazard: CyberData strongly recommends that you first reboot the
device before attempting to upgrade the firmware of the device. See
"Reboot the
GENERAL ALERT
Figure 2-47. Firmware Page
Installing the Singlewire InformaCast Indoor Intercom with Keypad
Section 2.4.4, "Log in to the Configuration Home
Device".
931640A
Configure the Autoprovisioning Parameters
(Figure 2-47).
CyberData Corporation
99
Section 2.6,