CyberData 011478 Operation Manual page 99

2. On the Audiofiles page, enter values for the parameters indicated in
Note
Web Page Item
Available Space
0-9
Dot
Audio Test
Page Tone
Your IP Address Is
Rebooting
Restoring Default
Ringback Tone
Ring Tone
Intrusion Sensor Triggered
Door Ajar
Night Ring
SIP Multicast Message
Operations Guide
The question mark icon (
after the Toggle Help button is pressed
Table 2-18. Audiofiles Configuration Parameters
Description
Shows the space available for the user to save custom audio files if they want to change the
message when the door or sensor is triggered.
The name of the audio configuration option is the same as the spoken audio that plays on
the board (24 character limit).
'0' corresponds to the spoken word "zero."
'1' corresponds to the spoken word "one."
'2' corresponds to the spoken word "two."
'3' corresponds to the spoken word "three."
'4' corresponds to the spoken word "four."
'5' corresponds to the spoken word "five."
'6' corresponds to the spoken word "six."
'7' corresponds to the spoken word "seven."
'8' corresponds to the spoken word "eight."
'9' corresponds to the spoken word "nine."
Corresponds to the spoken word "dot." (24 character limit)
Corresponds to the message "This is the CyberData IP speaker test message..." (24
character limit)
Corresponds to a simple tone used for beep on initialization and beep on page (24 character
limit).
Corresponds to the message "Your IP address is..." (24 character limit).
Corresponds to the spoken word "Rebooting" (24 character limit).
Corresponds to the message "Restoring default" (24 character limit).
This is the ringback tone that plays when calling a remote extension 
(24 character limit).
This is the tone that plays when set to ring when receiving a call 
(24 character limit).
Corresponds to the message "Intrusion Sensor Triggered" (24 character limit).
Corresponds to the message "Door Ajar" (24 character limit).
Specifies the ringtone for nightring. By default this parameter uses the same audio file that is
selected for the Ring Tone parameter.
This is the message that plays when multicast audio is initiated by the call button.
Click on the Browse button to navigate to and select an audio file.
The Play button will play that audio file.
931667A
Installing the SIP Outdoor Video Intercom with RFID
) in the following table shows which web page items will be defined
.
Intercom Setup
Table 2-18.
CyberData Corporation
92