CyberData 011478 Operation Manual page 90

Web Page Item
Polycom Emergency Channel
2.4.12.1 Assigning Priority
The device will prioritize simultaneous audio streams according to their priority in the list.
If both SIP and Multicast is enabled, SIP audio streams are considered priority 4.5. SIP audio will
interrupt multicast streams with priority 0 through 4 and will be interrupted by multicast streams with
priority 5 through 9.
During priority 9 multicast streams, the volume is set to maximum.
Note
Ringtones and
Ringtones all play at the same priority level. This means that it is possible to have a nightring tone
Nightringtones
and a normal ringtone playing at the same time.
Operations Guide
Table 2-15. Multicast Page Parameters (continued)
Description
When an emergency Polycom channel/group number is selected, the device will
subscribe to the default channel for one-way group pages. Group Numbers 1-25
are supported. Or, select Disabled to disable this channel.
Use this button to preview the strobe flashing behavior for the Multicast Strobe
Settings.
Click the Save button to save your configuration settings.
Click on the Reboot button to reboot the system.
SIP calls, multicast streams, ring tones, ringback tones, and nightring tones are all
prioritized.
931667A
Installing the SIP Outdoor Video Intercom with RFID
CyberData Corporation
83
Intercom Setup