• Apply a small quantity of SUZUKI MOLY PASTE to the
armature shaft.
)
)
) 99000-25140: SUZUKI MOLY PASTE
)
)
• Install the brush holder as shown.
• Align the match marks on the starter motor case with the match
mark on the housing end.
• Apply a small quantity of THREAD LOCK "1342" to the starter
motor housing bolts.
/
/
/ 99000-32050: THREAD LOCK "1342"
/
/
• Install the starter motor. (!3-38)
STARTER RELAY INSPECTION
• Remove the side frame cover (left side). (!5-6)
• Disconnect the battery - lead wire and starter relay cover 1.
ELECTRICAL SYSTEM
6-23