Generator Cover Bearing - Suzuki RV125 Service Manual

3-48 ENGINE

GENERATOR COVER BEARING

REMOVAL
• Remove the dust seal 1.
% 09913-50121: Oil seal remover
"
The removed oil seals should be replaced with new
ones.
• Remove the generator cover bearing 2.
% 09921-20240: Bearing remover set
"
The removed bearing should be replaced with new
ones.
• Remove the dust seal 3.
% 09913-70210: Bearing installer set
INSTLLATION
• Install the dust seals and bearing with the special tool.
% 09913-70210: Bearing installer set
• Apply a small quantity of SUZUKI SUPER GREASE to the lip
of the dust seal.
( 99000-25010: SUZUKI SUPER GREASE "A"