Frequency Selector <3; Mode Selector <4; Timer <5 - Physiomed HIVAMAT 200 Operating Instructions Manual

2 Controls and Indicators
2.1.3 Frequency Selector <3>
2.1.4 Mode Selector <4>
2.1.5 Timer <5>
At the end of the massage, the timer sounds an acoustical signal and automatically switches off the elec-
trostatic field. Turning the intensity control <6> back to zero causes the timer to automatically return to
its default setting of 20 minutes.
®
HIVAMAT 200
The display of the frequency selector <3> shows the massage fre-
quency selected in Hz. Using the plus and minus keys, the massage
frequency may be continuously selected within the range of 5 - 200
Hz. The frequency can be turned high or down in 1 Hz steps or, by
pro-longed pressing, in larger steps (repeat function). The default set-
ting after switch-on is 100 Hz.
The display of the mode selector <4> shows the individual ratio of
pulse time to pause time. Depending on the frequency selected, the
bars refer to the values illustrated in the table. The mode selector key
enables you to choose between 5 mode set-tings (refer to
Modes on page 14). The default setting after switch-on is 1:1 (middle
position).
The display of the timer <5> shows the remaining duration of the
massage in minutes. The flashing decimal point indicates that the
timer is running. The plus and minus keys serve for lengthening or
shortening the mas-sage time in 1 minute steps or, by prolonged
pressing, in larger steps (repeat function). The default setting is 20
minutes; maximum mas-sage duration is 30 minutes. The timer is star-
ted with regulation of the intensity control <6> and stops when the
intensity control <6> is turned to zero. Massage duration can be
shortened during the massage, also with in-tensity turned high,
whereas it cannot be lengthened before the intensity control <6>
has been turned to zero. The default setting after switch-on is 20.0
minutes.
PHYSIOMED ELEKTROMEDIZIN AG
Instrument
5