General Procedures; Power On/Boot Up - GE Vivid E80 Service Manual

General Procedures and Functional Checks

Power ON/Boot Up

Warnings
DANGER
DANGER
DANGER
CAUTION
CAUTION
NOTE:
4-2

General procedures

ALWAYS CONNECT THE ULTRASOUND SYSTEM TO A
FIXED POWER SOCKET WHICH HAS THE PROTECTIVE
GROUNDING CONNECTOR.
NEVER USE A THREE-TO-TWO PRONG ADAPTER; THIS
DEFEATS THE SAFETY GROUND.
ENSURE THAT THE POWER CORD AND PLUG ARE
INTACT AND THAT THE POWER PLUG IS THE PROPER
HOSPITAL-GRADE TYPE (WHERE REQUIRED).
Ultrasound system requires all covers.
Operate this Ultrasound system only when all board covers and
frame panels are securely in place. The covers are required for
safe operation, good Ultrasound system performance, and
cooling purposes.
Use only power supply cords, cables, and plugs provided or
designated by GE.
Do not cycle the Circuit Breaker ON-OFF-ON in less than five
(5) seconds. When turning OFF the Circuit Breaker, the
Ultrasound system should de-energize completely before
turning the circuit breaker ON.
–
Vivid E80/E90/E95
GC091052 Rev. 3
Service Manual