Lower Operating Panel Parts Replacement; Knobs For Encoders And Slidepots Replacement - GE Vivid E80 Service Manual

Replacement Procedures
Lower Operating Panel Parts

Knobs for Encoders and Slidepots replacement

Knobs for Encoders and Slidepots removal procedure
NOTE:
Knobs for Encoders and Slidepots installation procedure
8-38
If you are going to remove the Upper Operating Panel, you only
need to remove the knobs below the Touch Screen, including
the Volume knob.
1. Pull the knobs one by one until all knobs have been
removed.
2. Store the knobs in a clean place.
Install the knobs one by one. Refer to the illustration below for
the correct position for the knobs.
Figure 8-6. Knobs for Encoders and Slidepots
replacement
–
Vivid E80/E90/E95
GC091052 Rev. 3
Service Manual