B Setting Paper Weight - Sekonic SR-2300 Manual

B
Setting paper weight
Set the paper weight when double-feeding errors are detected.
Paper weight can be set according to the following six types: "Automatic," "64g/m
2 2
"105g/m ," "128g/m ," and "157g/m
If it's set to "Automatic," the device detects double-feeding errors based on the weight of first
sheet read after the device is activated.
1.
MENU
Press the
2.
UP
Use the
and press the
3.
UP
Use the
and press the
(" " mark flashes in the first column of the first line on the LCD.)
4.
UP
Use the
5.
FEED/ENTER
Press the
(The flashing " " mark disappears from the LCD.)
6.
Keep pressing the
or press the
2
."
switch to enter the menu mode.
DOWN
and switches to select the following parameters,
FEED/ENTER
switch.
DOWN
and switches to select [Paper Weight] setting,
FEED/ENTER
switch.
DOWN
and switches to set the value.
switch to save the setting value into memory.
CLEAR/EXIT
switch until it returns to normal mode,
C
MENU
switch to return to normal mode.
B
Data reading settings Setting paper weight
Paper weight
setting values
• Automatic
2
• 64g/m
2
• 84g/m
• 105g/m
• 128g/m
• 157g/m
2 2
," "84g/m ,"
2
2
2
-35-