Setting Parity - Sekonic SR-2300 Manual

Connecting to a computer
(3) Use the
and press the
(" " mark flashes in the first column of the first line on the LCD.)
(4) Use the
(5) Press the
(The flashing " " mark disappears from the LCD.)
(6) Keep pressing the
or press the
2-3.

Setting parity

(1) Press the
(2) Use the
and press the
(3) Use the
and press the
(" " mark flashes in the first column of the first line on the LCD.)
(4) Use the
(5) Press the
(The flashing " " mark disappears from the LCD.)
(6) Keep pressing the
or press the
-24-
B
RS-232C
UP DOWN
and switches to select [Character Bit Length] setting,
FEED/ENTER
switch.
UP DOWN
and switches to set the value.
FEED/ENTER
switch to save the setting value into memory.
CLEAR/EXIT
switch until it returns to normal mode,
C
MENU
switch to return to normal mode.
MENU
switch to enter the menu mode.
UP DOWN
and switches to select the following parameters,
FEED/ENTER
switch.
UP DOWN
and switches to select [Parity] setting,
FEED/ENTER
switch.
UP DOWN
and switches to set the value.
FEED/ENTER
switch to save the setting value into memory.
CLEAR/EXIT
switch until it returns to normal mode,
C
MENU
switch to return to normal mode.
Character bit length
value
• 7 • 8
Parity setting values
• None
• Odd • Even