B Setting Min. Density Level - Sekonic SR-2300 Manual

B
Data reading settings
B
Setting min. density level
You can set the min. density level for this device when it is in SR-600 operating mode. Sensitivity
levels range from 1 to 16, with level 1 being the maximum sensitivity and level 16 the lowest
sensitivity.
1.
MENU
Press the
2.
UP
Use the
and press the
3.
UP
Use the
and press the
(" " mark flashes in the first column of the first line on the LCD.)
4.
UP
Use the
5.
FEED/ENTER
Press the
(The flashing " " mark disappears from the LCD.)
6.
Keep pressing the
or press the
-30-
Setting min. density level
switch to enter the menu mode.
DOWN
and switches to select the following parameters,
FEED/ENTER
switch.
DOWN
and switches to select [Min. Density Level] setting,
FEED/ENTER
switch.
DOWN
and switches to set the value.
switch to save the setting value into memory.
CLEAR/EXIT
switch until it returns to normal mode,
C
MENU
switch to return to normal mode.
Min. density level
setting values
1 - 16