Appendix B Sheet Creation Reference - Sekonic SR-2300 Manual

Appendix
B
Sheet creation reference
You can use paper that you make yourself with this device in addition to the optional paper that
we offer. If you make your own paper, follow the specifications below.
(1) Sheet size
Height 110-335.6mm
(2) Weight and thickness
g/m2 (grams per sheet)
mm (thickness)
(3) Paper quality
OCR paper, quality paper, or recycled OCR paper.
(4) Printing ink (printing surrounding mark fields)
When the wavelength of the OMR reading sensor light source is 940nm, use
spectrum band B900 to measure the PCS and use ink at PCS 0.15 or less.
Print timing marks in ink at PCS 0.85 or higher.
When the wavelength of the OMR reading sensor light source is 660nm, use
spectrum band B680 to measures the PCS and use ink at PCS 0.15 or lower.
Print timing marks in ink at PCS 0.85 or higher.
(5) Printing position accuracy
Parallelism
Perpendicularity Adjust printing perpendicularity for timing marks and data
Other
(6) Prohibited printing zones
Do not print between timing marks, or between the top-end (bottom-end)
timing mark and the top edge (bottom edge) of the mark sheet.
Top-end margin*: 9mm or more from the top edge to the first timing mark.
Bottom-end margin: 9mm or more from the last timing mark to the bottom edge.
Side margin:
Appendix
Width 63.5-228.6mm
64 - 157
0.08 - 0.19
Adjust printing parallelism for timing marks and data marks
0.2mm or less based on the cutting edge of the timing mark
side.
marks 0.2mm or less based on the cutting edge of the
timing mark side.
Adjust to ±0.2mm or less of specified measurements unless
otherwise specified.
4mm or more on the opposite side of the sheet's standard
edge.
*For IBM card size, 5mm or more from the top edge to the
first timing mark.
B
Sheet creation reference
-i-