Setting Character Code - Sekonic SR-2300 Manual

Connecting to a computer
(4) Use the
(5) Press the
(The flashing " " mark disappears from the LCD.)
(6) Keep pressing the
or press the
2-6.

Setting character code

(1) Press the
(2) Use the
and press the
(3) Use the
and press the
(" " mark flashes in the first column of the first line on the LCD.)
(4) Use the
(5) Press the
(The flashing " " mark disappears from the LCD.)
(6) Keep pressing the
or press the
-26-
B
RS-232C
UP DOWN
and switches to set the value.
FEED/ENTER
switch to save the setting value into memory.
CLEAR/EXIT
switch until it returns to normal mode,
C
MENU
switch to return to normal mode.
MENU
switch to enter the menu mode.
UP DOWN
and switches to select the following parameters,
FEED/ENTER
switch.
UP DOWN
and switches to select [Character Code] setting,
FEED/ENTER
switch.
UP DOWN
and switches to set the value.
FEED/ENTER
switch to save the setting value into memory.
CLEAR/EXIT
switch until it returns to normal mode,
C
MENU
switch to return to normal mode.
Flow control
setting values
• RS/CS • Xon/Xoff
Character code
setting values
• Accept All
• Ignore 4 Codes
If ignore some is
selected, the following
codes are ignored.
• 20H • 0AH
• 7FH • 1AH