Marking Instructions - Sekonic SR-2300 Manual

Marking instructions

Marking instructions
Marks readable by this device are as follows.
1) Mark size: 0.5 x 3mm (standard mark)
2) Readable writing instruments: pencils (black, HB or darker), ballpoint pens
(black or blue)
3) Readable marks: Filled in, O, X,
4) Readable darkness: PCS 0.6 or darker
Readable mark darkness can be adjusted.
You can check mark darkness using a diagnostic utility included in the
package, so check the darkness of the marks you want to read and adjust
the reading setting.
S e e
"Reading Settings
in this manual on P.30
"Reading Settings
Note)
When using a mechanical pencil, make sure to mark with adequate
darkness.
-18-
B
Setting Reading Sensitivity Level"
B
Setting Contrast" in this manual on P.31