Data Reading Settings Setting Column - Sekonic SR-2300 Manual

Data reading settings
This section explains how to change various sheet-reading settings.
All settings can also be made using computer commands.
B
Setting column
Set the column. The number of columns is different depending on the reading sensor.
Sensor pitch
1/6 inch
0.2 inch
0.2 inch S
0.25 inch
0.3 inch
0.3 inch F
1.
MENU
Press the
2.
UP
Use the
and press the
3.
UP
Use the
and press the
(" " mark flashes in the first column of the first line on the LCD.)
4.
UP
Use the
5.
FEED/ENTER
Press the
(The flashing " " mark disappears from the LCD.)
6.
Keep pressing the
or press the
Setting range
1-48 columns
1-40 columns
1-40 columns
1-33 columns
1-27 columns
1-24 columns
switch to enter the menu mode.
DOWN
and switches to select the following parameters,
FEED/ENTER
switch.
DOWN
and switches to select [Setting of Column] setting,
FEED/ENTER
switch.
DOWN
and switches to set the value.
switch to save the setting value into memory.
CLEAR/EXIT
switch until it returns to normal mode,
C
MENU
switch to return to normal mode.
Data reading settings
Default value
48 columns
40 columns
40 columns
33 columns
27 columns
24 columns
Columnsetting values
1 - maximum columns
B
Setting column
-27-