Sekonic SR-2300 Manual page 29

Setting magnification when timing control types are selected
1.
MENU
Press the switch to enter the menu mode.
2.
UP
Use the and
FEED/ENTER
and press the
3.
UP
Use the and
FEED/ENTER
and press the
(" " mark flashes in the first column of the first line on the LCD.)
4.
UP
Use the and
5.
FEED/ENTER
Press the switch to save the setting value into memory.
(The flashing " " mark disappears from the LCD.)
6.
Keep pressing the
MENU
or press the
Data reading settings
DOWN
switches to select the following parameters,
switch.
DOWN
switches to select [Magnification] setting,
switch.
DOWN
switches to set the value.
CLEAR/EXIT
switch until it returns to normal mode,
C
switch to return to normal mode.
B
Setting reading method
Magnification setting values
• Top-end timing
control type
1 - 9 (times)
• Bottom-end timing
control type
2 - 9 (times)
-29-