Error Detection Settings - Sekonic SR-2300 Manual

Error detection settings

Error detection settings
Error detection settings for this device differ depending on the operating mode. See the following
table for settings.
All settings can also be made using computer commands.
SR-2300 mode
Automatic paper discharge
"Yes" or "No"
Hopper empty detection
"Yes" or "No"
Timing error detection
"Yes" or "No"
If mark skew detection is on, number of rows "1-155 rows"
If mark skew detection is on, level "1-16"
S e e
"Error displays and countermeasures" in this manual on P.53-P.56.
Error detection settings
1.
MENU
Press the
2.
UP
Use the
and press the
3.
UP
Use the
and press the
(" " mark flashes in the first column of the first line on the LCD.)
-36-
Default
value
Yes
No
Yes
Double-feeding detection
"Yes" or "No"
Left end skew detection
"Yes" or "No"
Mark skew detection
"Yes" or "No"
switch to enter the menu mode.
DOWN
and switches to select the following parameters,
FEED/ENTER
switch.
DOWN
and switches to select Setting of Error Detection,
FEED/ENTER
switch.
Default
SR-600 mode
value
Yes
Yes
No
1 row
3