Festo CPX DE Series Manual page 40

1. Overview and sub−bases for CPX I/O modules
1−22
Sub−base CPX−AB−4−M12−8POL
Please note
In order that completely fitted modules with sub−base
CPX−AB−4−M12−8POL comply with protection class
IP65/IP67:
Use cable type KM12−8GD8GS−2−PU from Festo for
·
connecting the cylinder−valve combination type DNCV or
other sensors and actuators (see section B.3).
Tighten the union nuts of the plugs at first by hand.
·
Seal unused sockets with protective caps type ISK−M12
·
(Accessories).
Screening plate type CPX−AB−S−4−12
Sub−base CPX−AB−4−M12−8POL can be combined with a
screening plate. Connecting plate must be ordered separately
as an accessory.
Instructions on subsequent fitting of the screening/shield
plate can be found in section 1.3.2.
Instructions on using the screening plates can be found with
sub−base CPX−AB−4−M12x2−5POL.
Festo P.BE−CPX−EA−EN en 0804g