Festo CPX DE Series Manual page 112

3. Digital CPX output modules
Module parameters: Idle mode channel x
Function no. Access to these module parameters is made via protocol−specific functions
(see the manual for the bus node).
Description Only relevant for certain field bus protocols
Idle mode channel x: Hold last state
Idle state channel x:
Note With the aid of the so−called Idle mode parameterization, you can determine the
signal status which the outputs are to assume when switching is made to the
Idle state (see also CPX system manual).
This parameter is not available with all field bus protocols.
Tab. 3/21: Idle mode channel x (channel−specific)
Module parameters: Force channel x
Function no. Access to these module parameters is made via protocol−specific functions
(see the manual for the bus node).
Description Force mode of outputs channel x:
Force state of outputs channel x:
Note The Force function enables the manipulation of signal states detached from
actual operating states (see also CPX system manual).
Tab. 3/22: Force channel x (channel−specific)
3−24
Idle state (presetting)
Set output
Reset output (presetting)
blocked (presetting)
Force state
Set signal
Reset signal (presetting)
Festo P.BE−CPX−EA−EN en 0804g