Festo CPX DE Series Manual page 173

A. Technical appendix
Technical specifications
General technical specifications of the CPX terminal
Protection class as per EN 60529
Operating voltage supply for electronics/sensors (V
Nominal voltage
Internal current consumption at 24 V (internal electronics)
Load voltage supply for valves (V
Nominal voltage
Internal current consumption at 24 V (internal electronics,
without valves)
Diagnostic message undervoltage V
load voltage outside function range)
Digital outputs (valve solenoid coils)
Rated load voltage
Intended for connecting to pneumatics
Short circuit protection at valve output
Monitoring wire fracture (open load)
Isolation
Electrical isolation...
between the channels (valve solenoid coils)
between the operating voltage supply for the electronics/
sensors (V ) and the load voltage for the valves (V
EL/SEN
Module code [type code] (CPX−specific)
Module identification (Handheld)
Festo P.BE−CPX−EA−E N en 0804g
EL/SEN
)
VAL
(monitoring V
VAL
VABA−10S6−X1/−X2 for
VTSA pneumatics (ISO)
see CPX system manual
IP65, in fitted state
)
24 V DC ±25 %
typ. 15 mA
24 V DC ±10 %
typ. 30 mA
, 21.6 21.5 V
VAL
max. 32 outputs
V
VAL
VTSA (ISO, type 44)
yes (electronic),
response threshold , 1.0 A
can be parameterized
tested with 500 V DC
none
with power supply via manifold
) sub−base type:
VAL
CPX−GE−EV−S:
CPX−GE−EV−S−7/8−5POL: yes
CPX−GE−EV−V...:
69
ISO PlugIn or type 44 (depending
on the version of the Handheld)
none
yes
A−13