Festo CPX DE Series Manual page 37

1. Overview and sub−bases for CPX I/O modules
1
Cover AK−8KL
2
Screw connector
set VG−K−M9
Fig. 1/6: Cover and screw connector set for sub−base CPX−AB−8−KL−4POL (for complying
with protection class IP65/IP67)
Festo P.BE−CPX−EA−EN en 0804g
You will then comply with protection class IP65/IP67
In order that sub−base CPX−AB−8−KL−4POL complies with
protection class IP65/IP67, use cover type AK−8KL and the
screw connector set type VG−K−M9 from Festo. Note the
relevant fitting instructions.
1
Sub−base CPX−AB−1−SUB−BU−25POL
The completely fitted sub−base CPX−AB−1−SUB−BU−25POL
complies with protection class IP20.
In order that sub−base CPX−AB−1−SUB−BU−25POL complies
with protection class IP65/IP67, use plug type
SD−SUB−D−ST25 from Festo.
When fitting the plug onto the sub−base, observe the
maximum tightening torque of 0.5 Nm.
2
1−19