Umpcfg; Setump - Broadcom NetXtreme BCM570 Series Diagnostic User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User's Guide
-i
-a
-e
-d
10.211

umpcfg

cmd: umpcfg
Description: Configure UMP in NVRAM
Syntax: umpcfg
1
UMP Settings
Description:
Provides the sub menu with the options described below.
0
1
2
3
4
5
6
7
Save and Exit
2
Description:
Saves the modified UMP Configuration Table to the network adapter's non-volatile memory
and exists.
3 Exit without Saving
Description:
Exits without saving any changes to the UMP Configuration Table.
10.212

setump

cmd: setump
Description: Enable/Disable UMP
Syntax: setump
Debug display of CPU code loading
Debug prompt after CPU code loading
Enable New UMP Echo Test in UMP Firmware
Disable New UMP Echo Test in UMP Firmware
Return to previous menu.
Enable/Disable SetLink
Enable/Disable RDIStallTimer
Set RDIStallTimerValue
DisableHostHashTable
Enable/Disable HostEchoControl
Enable/Disable Exceed_375ma_rule
Link Speed
0 : Return to previous menu
1 : Speed 10/100 (default)
2 : Speed ALL
3 : Speed 10
4 : Speed 100
5 : Speed 1000
6 : Duplex
7 : Auto/Force Mode
8 : Pause Capability
page 134
Broadcom Confidential and Proprietary