Wbuf; Rbuf; Cpbuf; Echo - Broadcom NetXtreme BCM570 Series Diagnostic User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User's Guide
10. 16 bytes of 0 and f
11. 32 bytes of 0 and f
12. 64 bytes of 0 and f
10.182

wbuf

cmd: wbuf
Description: Write tx|rx buffer with specified data at offset. Only works with static buffer
selection –A.
Syntax: wbuf tx|rx <offset> <data>
10.183

rbuf

cmd: rbuf
Description: Read tx|rx|bistin|bistout|bistex buffer. Read tx|rx|bistin|bistout|bistex buffer
with specified at offset with a specified length. Only works with static buffer selection -A.
Syntax: rbuf tx|rx|bistin|bistout|bistex <offset> <len>
10.184

cpbuf

cmd: cpbuf
Description: Copy the content of rx buffer into tx buffer. Only works with static buffer
selection –A.
Syntax: cpbuf <offset> <length>
10.185

echo

cmd: echo
Description: echo <string> to screen.
Syntax: echo <string>
10.186

pause

cmd: pause
Description: Pause for user to hit a key. If no parameter is entered, 'press any key to
continue...' will be displayed
Syntax: pause < message>
page 127
Broadcom Confidential and Proprietary