Flshmode; Flshread; Chkpxe; Dir - Broadcom NetXtreme BCM570 Series Diagnostic User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User's Guide

10.15 flshmode

cmd: flshmode
Description: Configure ASF in NVRAM
Syntax: flshmode [auto | passthru | legacy | new]

10.16 flshread

cmd: flshread
Description: Same as seread
Syntax: flshread start[-end | len]

10.17 chkpxe

cmd: chkpxe
Description: Check PXE code image
Syntax: chkpxe <filename>

10.18 dir

cmd: dir
Description: display file directory in NVRAM
Syntax: dir

10.19 erase

cmd: erase
Description: erase file from directory in NVRAM
Syntax: erase <entry> | all
Options:
-y

10.20 pxeprg

cmd: pxeprg
Description: Program PXE firmware into NVRAM. This command reads PXE code from a
file and program into NVRAM
do not ask for conformation
page 64
Broadcom Confidential and Proprietary