Broadcom NetXtreme BCM570 Series Diagnostic User Manual page 65

Broadcom NetXtreme Ethernet Adapter • Diagnostic User's Guide
-> 7
HW Selfboot Driver WOL selection
0. Disable
1. Magic Packet WOL Enable
----------------------------------------------- LED Mode (option 8)-----------------------------------------_
-> 8
HW Selfboot LED Mode selection
0. Mac Mode
1. Phy1 Mode
2. Phy2 Mode
3. Shared Traffic/Lik LED Mode
----------------------------------------------- VPD Data (option 9)-----------------------------------------_
-> 9
HW Selfboot VPD Data
1. Part Number
2. Engineering Change
3. Serial Number
4. Manufacturing ID
5. Read only VPD Vendor Specific Data (V0)
6. Product Name
x. Save & exit
----------------------------------------------- MBA Configuration (option B)----------------------------------------
-> B
HW Selfboot MBA Data
1. VLAN Enable
2. VLAN ID
3. MBA HIDE BANNER
4. MBA HOT KEY
5. MBA PROTOCOL
6. MBA CONFIG TIME OUT
7. MBA BOOTSTRAP
8. MBA LINK SPEED
x. Save & exit
Description of above parameters:
: Broadcom NetLink Fast Ethernet Controller
: Disabled
: 0
: Disabled
: Ctrl-B
: PXE
: 0
: AUTO
: AUTO
page 56
Broadcom Confidential and Proprietary
: BCM95906
: 106679-15
: 0123456789
: 14e4
: