Eswitch - Broadcom NetXtreme BCM570 Series Diagnostic User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User's Guide
-h Hide MBA Setup Prompt 0: Dis 1: En
-k MBA Setup Hot Key 0: Ctrl-S 1: Ctrl-B
-m MBA Boot Protocol 0: PXE 1: RPL 2: BOOTP 3: iSCSI
-v Rd VPD Vendor Data V0
-b MBA Bootstrap Type 0: Auto 1: BBS 2: Int18 3: Int19
-t MBA Delay Time 0-15
-e VLan 0: Dis 1:En
-i VLAN ID
-s MBA Link Speed 0: Auto 1: 10HD 2: 10FD 3: 100HD 4: 100FD
10.219

eswitch

cmd: eswitch
Description: Configure Eswitch on the device that support eswitch, such as 5756.
Syntax: eswtich
Options:
-d
-l
-e
-f
-m
Change the port to Docking mode
Change the port to Laptop mode
Enable E-switch, B57diag override the hardware manual switch.
Forbid software E-Switch, but hardware eswitch works. Without this
option, PHY loopback test, external loopback test (pkttest -e), and
carrier test are performed on both laptop mode and docking mode.
With this option, above tests are performed on the default port.
internal engineering manual switch and MAC test
page 138
Broadcom Confidential and Proprietary