Petest; Errctrl; Sedvt - Broadcom NetXtreme BCM570 Series Diagnostic User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User's Guide
10.126

petest

cmd: petest
Description: Perform parity error test on a bridge
Syntax: petest <bridge>
10.127

errctrl

cmd: errctrl
Description: Configure Error Control Setting
Syntax: errctrl [w|c|a|l|s]
w - Wait on Error
Program will pause and wait for user's action (eng. default)
c - Continue on Error
Program will continue even if the error is detected
a - Abort on Error (Manufacturing default)
Program stops
l - Loop on Error
Program will retry the same test
s - Skip on Error
Program will skip the rest of the present test
10.128

sedvt

cmd: sedvt
Description: Perform NVRAM dvt test. When 'init' subcommand is entered, the NVRAM
is initialized into pseudo random pattern. The original content is DESTROYED.
Syntax: sedvt [init]
Options:
-a
-e
-f
-l<HEX>
-n<DEC>
-p
-r
-s
Access test
Erase with reset
force
size (def=00000100)
iteration (def=0)
pause
Read Test with reset
skip checking entire NVRAM
page 109
Broadcom Confidential and Proprietary