Smbus; Cls; Loop; Dbmode - Broadcom NetXtreme BCM570 Series Diagnostic User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User's Guide
Description: Exit System
Syntax: quit
10.168

smbus

cmd: smbus
Description: ASF terminal. Run this command to access SMBus, the parameter a1 and a2
are one byte value to specify the NIC SMBus Addresses. It sets to 0 by default.
Syntax: smbus [a1 a2]
Options:
-s
10.169

cls

cmd: cls
Description: Clear Screen.
Syntax: cls
10.170

loop

cmd: loop
Description: loop on command.
Syntax: loop [iteration] <cmd> [<parameter> ...]
10.171

dbmode

cmd: dbmode
Description: Set DEBUG Mode to On or Off Mode.
Syntax: dbmode on|off
10.172

asf

cmd: asf
Description: run asf monitor program with option to Load asf firmware image. This
routine loads firmware images into CPU memory and execute the RXCPU. The default
files names are asfinit.bin, asfcpua.bin, and asfcpub.bin, which can be over written by
parameters.
Run in slave mode
page 123
Broadcom Confidential and Proprietary