Secfg - Broadcom NetXtreme BCM570 Series Diagnostic User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User's Guide
2. Set number base to hex, write 0x2 to serial eeprom location 0x25
0:> radix 16
0:> sewrite 25 2
*** Write Serial EEPROM (Auto Mode) ***

10.7 secfg

cmd: secfg
Description: Configure Boot Code or Selfboot firmware.
All option is for Boot Code only. If selected program with defaults (-f=1), eeprom.bin
must be found in the same directory of b57diag.exe.
Syntax: secfg
Options:
-v<n> : verbose level (0,1,2) (def=0)
-f : force to program with defaults
Example: (For Boot Code).
1 Program Serial EEPROM with defaults value and set verbose level to 0.
0:> secfg
Reading current NVRAM ... OK
Validating content...
1. MAC Address
2. Power Dissipated (D3:D2:D1:D0)
3. Power Consumed (D3:D2:D1:D0)
4. Vendor ID
5. Vendor Device ID
6. Subsystem Vendor ID
7. Subsystem Device ID
8. PXE (does not apply to PXE in system ROM)
9. PXE Link Speed { Auto(0),10HD(1),10FD(2)
10. Magic Packet WoL { Enable(1), Disable(2) }
11. Product Name : Broadcom NetXtreme Gigabit Ethernet Controller
12. Part Number
13. Engineering Change
14. Serial Number
15. Manufacturing ID
16. Asset Tag
17. Part Revision
18. Voltage { 1.3V(0), 1.8V(1) }
19. Force PCI Mode { Enable(1),Disable(2) }
20. PHY Type { Copper(1),Fiber(2) }
21. Led Mode { Mac Mode(0), Phy Mode1 (1), Phy Mode2 (2),
22. PHY ID ([PHY#2][PHY#3])
23. Max PCI Retry {0-7, 8=auto}
24. Advanced firmware feature (ASF/IPMI/UMP)
{ Enable(1), Disable(2) }
100HD(3),100FD(4) }: Auto
Shasta Mac Mode (3), SharedTraffic (4),
Wireless Combo (5)}
{ Enable(1), Disable(2) }
page 41
Broadcom Confidential and Proprietary
: 00:10:18:04:1a:36
: 10:0:0:100
: 10:0:0:100
: 14E4
: 1653
: 14E4
: 1653
: Disable
: Disable
: BCM95705A50
: 106679-15
: 0123456789
: 14e4
: XYZ01234567
: A0
: 1.8V
: Disable
: Copper
: Phy Mode1
: 00206160
: 8
: Disable