Regrestore; Nvsize; Aspm - Broadcom NetXtreme BCM570 Series Diagnostic User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User's Guide
-f<string>
-m
-r<DEC>
10.195

regrestore

cmd: regrestore
Description: Restore register content from a file. This command may be used together with
regdump to restore register got changed.
Syntax: regrestore <filename>
Options:
-c
-f<string>
-m
-r<DEC>
10.196

nvsize

cmd: nvsize
Description: Programs the NVRAM and TPM size in Kbyte to NVRAM. If [NVRAM] &
[TPM] options are entered, they are programmed to NVRAM. If [NVRAM] & [TPM]
options are NOT entered, calculated values are programmed. Use a zero value for
[NVRAM] & [TPM] to erase the programmed values.
Syntax: nvsize [NVRAM] [TPM]
Options:
-d
-D
10.197

aspm

cmd: aspm
Description: Configure the PCI-E Link power state operation at the root complex and the
device under test. Power state option described below.
0 ASPM disable
filename
MII Registers
Mac Registers (def=1)
PCI Config Reg.
filename
MII Registers
Mac Registers (def=1)
Display Present Size Programmed Into NVRAM
Specify [NVRAM] & [TPM] size in decimal (dflt. hex)
page 130
Broadcom Confidential and Proprietary