Table of Contents
Advertisement
Configuring Products for
Use on SynchLink
Chapter Summary
You must electronically (i.e. via software) configure the devices in
each set-up.
· For the ControlLogix SynchLink module, you must use
RSLogix 5000 to configure SynchLink.
For more information on how to use RSLogix 5000 to configure
your 1756-SYNCH module, see the ControlLogix SynchLink
Module user manual, publication 1756-UM521.
· For the ControlLogix Drive modules and the PowerFlex 700S
drives, you must use DriveExecutive in the DriveTools 2000
suite to configure SynchLink.
For more information on how to use DriveExecutive to
configure your 1756-DMxxx Series modules, see the
ControlLogix Drive Module user manual, publication
1756-UM522.
For more information on how to use DriveExecutive to
configure your PowerFlex 700S drives, see the High
Performance AC Drive PowerFlex 700S drives user manual,
publication 20D-UM001.
In this chapter, you read about the products that can be used on
SynchLink, including:
· ControlLogix SynchLink Module (1756-SYNCH)
· ControlLogix Drive Modules (1756-DMxxx Series)
· PowerFlex 700S Drive
Chapter 4 explains the Specific SynchLink Configurations.
Publication 1756-TD008A-EN-P - August 2002
3-11
Advertisement
Table of Contents
